Floe Boat Lift Wireless Remote

One of the coolest things I’ve seen lately is the Floe Boat Lift Wireless Remote. This bad boy allows you to control your boat lift from up to 150 feet away, making it super convenient if you’re not right next to the lift. The wireless remote also has a built-in key fob so you can easily keep track of it.

The Floe Boat Lift Wireless Remote is a great way to make your life easier when it comes to lifting your boat. This remote will allow you to operate your lift from anywhere within range, making it convenient and easy to use. The wireless remote is also very simple to install, so you won’t have to worry about any complicated wiring.

Floe Boat Lift Wireless Remote

Credit: www.old.floeintl.com

How Do I Sync My Boat Lift Remote?

Boat lifts are a great way to keep your boat protected from the elements and safe while you’re away. But what happens when the remote for your boat lift stops working? Here’s how to sync your boat lift remote so you can get back to enjoying your time on the water.

First, check the batteries in your remote. If they’re low, replace them with fresh ones. If that doesn’t work, try resetting the receiver unit on your boat lift.

To do this, unplug the receiver unit and then plug it back in again. Once it’s been reset, press and hold the “learn” button on the receiver unit until the LED light starts blinking. Next, press and hold the “up” button on your remote control until the LED light on the receiver unit starts blinking.

Once it does, release both buttons and your remote should now be synced with your boat lift!

How Do You Level a Floe Boat Lift?

If your floe boat lift is not level, you can adjust the leveling jacks on each side of the lift. To do this, first make sure that the power is off to the lift. Then, use a level to check the lift and see where it needs to be adjusted.

Once you know which way the lift needs to be moved, loosen the appropriate leveling jack nut with a wrench and turn the jack screw until the lift is level. Finally, retighten the leveling jack nuts so that the screws don’t move.

How Do You Adjust a Floe Dock?

If you have a floe dock, you may need to adjust it from time to time. Here’s how: 1. First, check the manufacturer’s instructions for your particular dock model.

2. If your dock is adjustable, there will be bolts or screws that you can loosen or tighten to make the adjustments. 3. To raise the dock, loosen the bolts or screws and then lift the dock up slightly until it is at the desired height. Then retighten the bolts or screws to secure the dock in place.

4. To lower the dock, first loosen the bolts or screws, then lower the dock until it is at the desired height. Again, be sure to retighten the bolts or screws once you have achieved the desired adjustment.

Why Does My Boat Lift Squeal?

If you’ve ever taken your boat out for a spin, you know the unmistakable sound of a boat lift squealing. But why does this happen? There are actually a few reasons why boat lifts can squeal.

One reason is that the bearings in the lift may be going bad. Another possibility is that the cables or pulleys could be misaligned. Or, it could simply be that the lift needs to be lubricated.

If you’re hearing a squealing noise coming from your boat lift, the first thing you should do is check the bearings. If they look worn or damaged, they will need to be replaced. If the bearings seem to be in good shape, then you’ll want to check the alignment of the cables and pulleys.

Make sure they are all lined up properly and not binding anywhere. If everything looks to be in order but your boat lift continues to squeal, then it’s likely that it just needs some lubrication. You can use WD-40 or another similar product to spray down all of the moving parts on your lift.

This will help reduce friction and hopefullyquietthe annoying squealing noise.

Floe Boat Lift Replacement Parts

If you have a floe boat lift, you know how important it is to keep it in good working order. That’s why it’s important to know where to find replacement parts if something should go wrong. There are a few different places you can look for floe boat lift replacement parts.

One option is to contact the manufacturer directly. They should be able to help you find the parts you need. Another option is to check with your local boat dealer or marina.

They may carry some of the parts you need, or they may be able to order them for you. Finally, you can also check online retailers that specialize in boat parts and accessories. A quick search should turn up a few options.

No matter where you get your floe boat lift replacement parts from, make sure they’re high quality so you can be confident your lift will continue to work properly for years to come.


In this blog post, the author discusses the Floe Boat Lift Wireless Remote, a device that allows users to remotely control their boat lift. The author describes how the remote works and how it can be used to improve the safety and convenience of using a boat lift. The author also provides some tips on how to install and use the remote.

Leave a Reply

Your email address will not be published. Required fields are marked *